High performance custom homes in Beaconsfield

Beaconsfield sits on the ridge above South Fremantle, in a city that has tied energy performance to its planning rules since 2007. On a split coded lot, one route to the higher density code is a home rated a full star above the Building Code. Our homes clear that bar as a matter of course.

Rear of an 8.4 star custom home in Palmyra, near Beaconsfield, by Norde Homes
Living area with a double height void in a Norde Homes custom home in Palmyra

Palmyra, a short drive from Beaconsfield. 8.4 stars on a constrained block. See the project.

Fremantle’s energy rules, and how we meet them

The City of Fremantle’s Local Planning Policy 2.2 covers lots with a split density code, such as R20/R25. To build at the higher code, one of four routes is the City’s energy efficiency schedule: a NatHERS rating at least one star above the Building Code requirement, which under today’s 7 star minimum means 8 stars.

The schedule also asks for a 3kW solar system, electric cooking, solar or heat pump hot water, and a rainwater tank, a greywater system or a registered significant tree. Where the solar or water items cannot reasonably be met, the City may accept an extra half star for each instead.

Norde is a custom home builder in Perth, and our homes typically reach 8 to 10 stars, so the rating is where we start rather than something we stretch for. Our closest completed home, in Palmyra, reached 8.4 stars on a constrained block with a difficult orientation.

Rear deck of an 8.4 star Norde Homes custom home in Palmyra

Palmyra. Designed around passive solar principles and built in reverse brick veneer. See the project.

Staircase and void in a reverse brick veneer home in Palmyra by Norde Homes

Understanding your Beaconsfield block

Beaconsfield sits on the limestone ridge that runs south from Fremantle. In places the rock is so close to the surface that the City heritage-lists natural limestone outcrops in the suburb. Limestone near the surface affects how a site is excavated and how footings are set, so it belongs in the design from the start.

The higher streets look west to the ocean, which is also where the afternoon sun comes from. Large west-facing glass is one of the biggest risks to a Beaconsfield home’s energy rating, and making the views and the comfort work together is design work, not a product choice.

You can check your own block on the state government’s acid sulfate soil risk map and the Perth groundwater map, and the City of Fremantle’s online mapping shows your lot’s density code, heritage status and any special control area. Every Norde project begins with a site assessment and a planning check, so these shape the design from day one.

Beaconsfield on the map

Beaconsfield sits in the City of Fremantle, between Fremantle, South Fremantle and Hamilton Hill.

  • CouncilCity of Fremantle
  • Postcode6162
  • Neighbouring suburbsFremantle, South Fremantle, White Gum Valley, Hilton and Hamilton Hill

Building in Beaconsfield, common questions

What people ask us most about building or rebuilding in Beaconsfield.

Yes. The City of Fremantle is within our service area, and our closest completed home is in nearby Palmyra, an 8.4 star home on a constrained block. We build across Perth from our base in Balcatta.

Since 1 May 2025, every new home in WA must reach at least 7 stars. On lots with a split density code, the City’s Local Planning Policy 2.2 offers the higher code to homes that meet its energy efficiency schedule, including a rating at least one star above the Building Code, which means 8 stars today. The policy was last amended in January 2022 and was due for review in 2026, so confirm the current requirements with the City before you design.

It depends on the design, the budget and the block. Our homes typically reach 8 to 10 stars through passive solar design and reverse brick veneer. Perth is NatHERS zone 13, where a 7 star home is permitted 52 MJ per square metre per year for heating and cooling, and 10 stars is 4.

It may be. Part of Beaconsfield falls within the South Fremantle Heritage Area, and the suburb has individually listed homes dating from the 1890s to the 1920s. Heritage protection can affect demolition and what you build, so check your lot on the City of Fremantle’s online mapping before you plan a knockdown rebuild.

It is the City of Fremantle’s special control area for small infill housing, covering parts of Beaconsfield, White Gum Valley, Hilton and O’Connor. On lots over 600 square metres it can allow an additional small home, with requirements for open space and higher than standard energy ratings, solar panels and water saving. The provisions are extended to February 2027 and were under review in 2026, so check their current status with the City.

Beaconsfield sits on the limestone ridge south of Fremantle, and in places the rock is close to the surface, which can affect excavation and footings. You can check your block on the state acid sulfate soil risk map and the Perth groundwater map, and we confirm the detail with a site assessment at the design stage.

Both. We can take a Beaconsfield project from first concept through to handover, or build from plans you already have. If you bring your own design, we review it for thermal performance and buildability first. See our services for how each path works.

Tell us what you have in mind

Share your block and how you want to live. The first conversation is free, with no obligation, and you speak with Marco, the builder, not a salesperson.

  • 8 to 10 star NatHERS performance
  • Design and build, or build only
  • Experienced oversight on every build

Prefer to call? (08) 6188 5966

Your vision, our craft.

Build the home you've been imagining. Share what you have in mind and we'll be in touch.

Get in touch